News
Swapping and Repairing Bare Bulbs for JVC PK-L2615U / PK-L2618U
Posted by Dalton Ikenberry at
Installation instructions: It is relatively easy to install the bulb into an existing housing. The only tools required are a Philips screwdriver and a pair of tweezers. It is best to work with the lamp in the orientation shown in the picture below once the 4 retaining screws are removed, be careful some parts may fall out. To remove the old bulb: Remove screw 1 and the metal bracket that it holds. Remove the two screws 2 that hold the wires to the bulb terminals. Be sure to remember which wire goes where. Remove the four screws 3 (two shown in picture,...
My Epson 5030/6030 will not start??? HELP!?!?!
Posted by Dalton Ikenberry at
So, you have an Epson 5030 or a 6030 and the projector will not kick on? Maybe it will kick on sometimes or it will have a really delayed start? This is a common issue and is well known. Generally, the projector will not kick on and the status light flashes blue with an orange solid light on the lamp light. This normally indicates a bad bulb, but bad bulbs do not light back up. Once a bulb goes bad it is done. With this issue some users find they can get their projector to work. Many users on one...
- 0 comments
- Tags: 5030, 6030, Epson, Firmware, Projector, Status Lights
Bulb Flickering?!?! How it is Caused and How to Solve it!
Posted by Dalton Ikenberry at
- 0 comments
- Tags: 4k projector flickering, 4k projector strobing, Arc Wander, Bulb, Bulb Flickering, Epson, Flicker, Optoma, Panasonic, Projector, Sony
My Samsung DLP TV is having Power on Issues! What Should I Do?!?!?
Posted by Dalton Ikenberry at
Did you just replace the bulb in your Samsung DLP TV and it DID NOT fix your picture kicking on? You are not the only one, in fact you and several people are experiencing a known issue with the television. This issue was so widespread and apparent that there was a class action lawsuit settled in 2012. The defect can cause several weird power issues like: Not turning on Experiencing a delay in turning on Making a clicking sound Cycling on and off Other similar problems This is because of cheaply made electrolytic capacitors that leak on the main board....
- 0 comments
- Tags: Clicking Sound, DLP TV, HLT5087SAX/XAA; HLT5087SX/XAA; HLT5089SAX/XAA; HLT5089SX/XAA; HLT5687SAX/XAA; HLT5687SX/XAA; HLT5689SAX/XAA; HLT5689SX/XAA; HLT6187SAX/XAA; HLT6187SX/XAA; HLT6189SAX/XAA; HLT6189SX/XAA, Power Issues, Samsung
My Optoma HD Projector has flickering colors! HELP!?!?!
Posted by Dalton Ikenberry at
So, your Optoma projector is having flickering/strobing color issues? Do not worry! This is something that can be fixed. With a little technical know how and some elbow grease we can get your projector back up and running. Cleaning the Color Wheel Dust can build up on your projector over time. This dust can also build up on the color wheel. The color wheel is a part of the projector that the light shines through to display its vivid array of colors. This can get dust built up on it and it can cause issues. The most common of theses...
- 0 comments
- Tags: Optoma HD Projector has flickering colors, optoma projector flashing colors, optoma projector flickering, projector flashing colors, projector flickering, projector lamp flickering, why is my projector flickering
CENTRALLY LOCATED SHIPPING FROM MISSOURI, USA!