News

Mitsubishi projectors units are a little bit different in the way that they display their lamp hours and how the LEDs function. This can lead to some confusion when changing the lamp. In this blog we are going to clear the air and help you get your unit back up and running! These projectors will do a few different things as the lamp hours go up on the timer. The timer is an internal clock that is controlled by the projector itself. When these projectors get to around 3750 hours a message will start to appear on the screen letting...

Hello again! Today we are excited to offer a new service to the local community and the nation. We are now offering projector repair services. Here at Jaspertronics we are equipped to handle several projector issues. We have done work on light engines, LCD panels, color wheels, ballast issues and more! We have handled a wide range of models as well from Epson to Barco. The service starts at $49.99 and carries a 90-day parts warranty; this is for the initial diagnostic on the repair and a cleaning if necessary. This can also be applied to the labor costs if...

The Sony LMP-H220. Whether you are repairing a loose bulb or replacing your old bulb with a new one in your existing housing, you are in the right place! This is a quick process that can easily be completed by anyone with light mechanical ability. First and foremost, always wear gloves when handling a bare bulb. The oils on our hands (even if they are the cleanest of cleans!) will leave residue on the bulb. While that bulb is working it reaches extreme temperatures. That residue creates a hotspot that can cause the bulbs cup to crack, rendering it inoperable....

Installation instructions: It is relatively easy to install the bulb into an existing housing. The only tools required are a Philips screwdriver and a pair of tweezers. It is best to work with the lamp in the orientation shown in the picture below once the 4 retaining screws are removed, be careful some parts may fall out. To remove the old bulb: Remove screw 1 and the metal bracket that it holds. Remove the two screws 2 that hold the wires to the bulb terminals. Be sure to remember which wire goes where. Remove the four screws 3 (two shown in picture,...